Ferric trichloride liquid for water treatment

Commodity: Ferric trichloride FeCl3

Content: 44%,41%,38%,35%,30%

Cas No.:7705-08-0

Property:

Reddish brown liquid, relative density 1.42, easy to be miscible with water, aqueous solution is acidic, oxidative corrosion of metal.

Application:

Ferric chloride used for sewage treatment, circuit board etching, stainless steel corrosion and mordant, it is a good substitute for solid ferric chloride.

It is a high-efficiency and cheap flocculant for urban sewage and industrial wastewater treatment.

It has significant precipitation of heavy metals and sulfides, decolorization, Deodorization, degreasing, sterilization, phosphorus removal, reducing water COD and BOD and other effects.

Product feature:

*More than 40% lower than the price of solid ferric chloride (same concentration), can completely replace solid ferric chloride;

*The operation of the solid preparation solution and the problem of incomplete dissolution are omitted;

*Substituting liquid or solid flocculant such as aluminum sulfate, polyaluminum chloride or polyferric sulfate, the treatment cost is reduced by more than 30%;
*Excellent flocculation performance, the sedimentation speed is higher than the aluminum salt series flocculant (aluminum sulfate, polyaluminum chloride, etc.), and the formed flower is dense;

*The amount of sludge generated is small, which can greatly save sludge treatment costs;

*Adapt to a wide range of water pH values, 4-12, preferably pH range 6-10;

*It has significant effects on sedimentation of heavy metals and sulfides, decolorization, deodorization, degreasing, sterilization, phosphorus removal, reduction of effluent COD and BOD.

Packing:

Plastic drum or tank